Service Description
Included with your order for the 81910A All-Parameter Analyzer is Start-Up Training on the use of the system. An Agilent engineer experienced in optical measurements and operation of this system will deliver this training to you at your site, using your 81910A. The training will cover the technology as well as the Graphical User Interface (GUI) and include hand-outs for later reference. You will learn how to set up the system to perform typical measurements and how to maintain the system.

Training Outline
• Definition of Terms (IL, PDL, GD/CD, DGD/PMD) & Conditions (low SSE for IL)
• Swept loss measurements (Mueller)
• Swept phase measurements (swept homodyne interferometry and how it works)
• D/DGD-Measurement Techniques: MPS vs. swept homodyne interferometry
• 81910A system architecture
• Graphical User Interface
• Overview of the system functions and capabilities
• Steps for setting up measurements
• Parameters conditioning measurements
• Measurement examples
• Interpretation of results

Your Benefits
• Shortened learning curve to effective use of your 81910A All-Parameter Analyzer
• Greater assurance of correct measurements on your DUT
• Faster return on your optical measurement system investment

Initiating the Service
After you order your 81910A All-Parameter Analyzer, an Agilent Technical Consultant will contact you to schedule the start-up training at your site. If you do not receive a call, please schedule the training for your 81910A All-Parameter Analyzer with your nearest Agilent knowledge services representative. Please have your Agilent Order Number on hand when calling your Agilent representative.

Telephone numbers:

Click here to Contact Agilent for assistance with all your test & measurement needs