NetworkTester

Phase 2 -- March 2004

Agilent's RouterTester 900 and NetworkTester test solutions played a major role in verifying that leading-edge equipment from multiple network equipment vendors is "IPv6 ready".

• Agilent Moonv6 Phase 2 report (May 2004, 150KB)
  Learn how NetworkTester and RouterTester 900 were used to demonstrate and verify key aspects of IPv6-capable firewalls and routers, including OSPFv3, BGP4+, IPv6 QoS, security policies, and deep packet inspection. This report includes test scenarios and configurations that you can reproduce to verify your own IPv6 network devices.
• Agilent Technologies' network security test equipment is first to validate firewall performance for IPv6
• Agilent's NetworkTester tests and verifies the IPv6 security abilities of Check Point's Next GenerationT Firewall with Application IntelligenceT using real-world test scenarios

Phase 1 -- October 2003

RouterTester 900's New IPv6 Software Application enabled customers to accelerate test cycles and meet QoS requirements for IPv6 interoperability at the Moonv6 multi-vendor test event.

• Agilent Technologies' New IPv6 Routing Test Equipment Successfully Validates Emerging Internet Protocol

* Test your security and content networking equipment with NetworkTester

* Verify your IPv6-capable switching and routing devices and networks using RouterTester 900

External links

		Moonv6
		IPv6 Forum
		6Bone: Testbed for Deployment of IPv6
		North American IPv6 Summit